Have you been looking for the best high pressure parts to fix your washer? There is a wide range of collections with various pressure washer models. Depending on what you want to clean, you can determine the perfect parts for your washer.
Let’s take a further look at the high pressure parts:
-
Hose
The hose is a very important part of your pressure washer. To spray water at a high temperature, you need to power a hose that can supply a larger amount of water in a small time. For example, you can use a hose that has the capability of supplying up to 4L of water per minute.
Also, be sure to check if there’s any blockage on the hose before fitting it to the machine. In order for the water pressure to be enough, the hose needs to transport water at a higher speed. Most of the time, how the pressure of the water from the hose depends on the machine’s power.
So if the water power from the hose is insufficient, then investigate the power washer machine and get any additional high pressure accessories if needed.
-
Valve
The valve serves an important role in diverting the water to the spray. And can be used to adjust the pressure of the water. The ability to control the pressure of water depends on the type of valve you have on your machine.
So if there’s a loss of water from the machine based on the pressure of water it produces, you can get a new one to issue. Additionally, attaching a pressure guage new the valve should help adjust the water pressure perfectly to increase and decrease the flow of water.
-
Nozzles
The Nozzle is important for the pressure washer to work properly. With a proper working nozzle, the pressure of the water will remain constant. However, its advisable to change the pressure washer nozzle over time because it tends to wear off after a long period of using it. And if the nozzle wears off, the water from the washer losses its pressure.
-
Regulator
The regulator regulates the water pressure from the system as the valve does. In fact, it can be used in place of a valve to experience the same results. This part aids the machine in releasing the water pressure instead of withstanding it.
Just like the valve and nozzle, the pressure regulator can also wear out. Thereby losing its effectiveness.
The above list is some of the high pressure parts of the pressure washer as well as how they operate with each other.
For more information Click Here!
