Manufacturers consider various factors when creating a commercial balustrade design for Australian standards. People must note that various railings suit specific places, making it necessary to formulate an ideal balustrade design.
Luckily, this article will educate you on the primary metrics that will help you create appropriate railings for an Australian market.
What Manufacturers Should Know About Commercial Balustrade Design for Australian Standards
Compliant manufacturers should contemplate the following metrics to churn out top-quality balustrades.
-
Height
Today, the Australian government says that a balustrade must be at least 1,000 millimeters (mm) high. Remember that professionals install these railings on decks or balconies, and thus this requirement ensures they guarantee everyone’s safety.
-
Handrail
Secondly, Australian standards recommend elliptical or circular handrails for one to hold them as they walk down the stairs. Additionally, these regulations recommend a thickness of about 30 to 50 millimeters(mm).
-
Impact-tolerant
Updated Australian design standards, such as AS 1170, recommend railings that can withstand a reasonable force. Interestingly, compliant balustrades pose no danger to anyone who leans against them, irrespective of their body weight.
We recommend balustrades with a minimum point load capacity of about 0.6kN to mitigate possible risks.
-
Stipulated gap size
Commercial balustrade manufacturers should ensure the opening is relatively small to thwart potential disasters. The standards say the opening should not allow a 125 mm sphere to pass through because it may expose children to the risk of falling.
-
Minimal horizontal elements
NCC discourages balustrade manufacturers from adding too many horizontal bars, especially for houses with high floors. Technically, these elements may encourage children to climb the balustrade, increasing the risk of a fatal fall.
Why Manufactures Should Choose a Compliant Commercial Balustrade Design Based on Australian Standards
Industrial balustrade design for Australian standards exists for the following reasons:
-
Efficient accident prevention
Balustrade standards exist to help manufacturers create safe railings that suit single people and families. For example, a good design reduces the risk of falls or injuries because it supports a given weight.
-
Durability
Secondly, these standards enable industries to manufacture long-lasting railings for their target market. For example, Aluminum and stainless-steel balustrades can withstand harsh UV rays or strong winds.
Conclusion
In closing the commercial balustrade design for Australian standards exists to warrant the safety of children and their parents. For this reason, all manufacturers must refer to these standards to adhere to them to avoid penalties or lawsuits.
